Jabsco AI Pump Timer Module (Mastercraft)

Increase the run time of the Jabsco Ballast Puppy pumps in many factory installed ballast systems to a maximum of 20 minutes for filling additional ballast.

If you've added additional ballast to your Mastercraft boat only to find that the factory pumps don't run long enough to completely fill the new bags, these 20 minute timer modules are the solution.

This timer module can also be used to control run-time and add AI functionality to ANY Jabsco Ballast Puppy wakeboard ballast pump. Ideal for aftermarket ballast system installations where automated control of the pump is desired.

Manufactured by Jabsco, the same company that makes the factory ballast pumps and timers, the 20 minute version is the same OEM part installed in the boat from the factory, but allows the pumps to run for up to 20 minutes (set during configuration), as opposed to the six minute units that came with your boat.

The Jabsco Ballast Timer Module is the best way to stop your Jabsco Ballast Puppy pump impellers from burning up if you have your system draining through the bottom thru-hull where you cannot determine how much water is left in the system. Keep your system functioning properly the entire summer with this simple add on. For more information, see our blog post on the  Jabsco Timer Module , includes a detailed explanation of how it works, when why it's used.

Installation does involve some basic wiring, but is as simple as removing the timers that came with the boat and installing these Enhancerd units in their place. Once installed, everything looks completely factory, because it is.

 

Download Jabsco Ballast Timer Instructions

This is without a doubt the easiest way to fix the issue of pumps shutting off before your auxiliary ballast system is completely full. End the headache of trying to full fill your ballast, and make full use of the additional weight you installed.

MasterCraft Ballast Control Box Location:

• 2007 - 2008 MasterCraft X-Star: Port Side/Rear Compartment/Front Wall
• 2007 - 2008 MasterCraft X-2: Port Side in front of rear storage compartment
• 2007 - 2008 MasterCraft X-1: Behind the driver's side throttle panel

This is the replacement for Mastercraft Part # 50043003.