

WakeBallast Enzo Centurion 2010-2016- SnugFit Bag - 1,450 lbs
- $719.99
- $698.98
More weight in the rear means a bigger wake and a better surf wave. This bag drops directly into your factory ballast system — no custom plumbing, no rewiring. It fills and drains automatically using your existing dash switches, just like stock, but with significantly more capacity.
Built in Chandler, Arizona and backed by a 2-year warranty. Most orders ship within 48–72 hours.
Each bag comes with male quick release 1 1/8” fittings to connect to your existing female quick release hose ends. If your boat requires different fittings, browse our fittings here .
The WakeBallast Enzo Sac is a great way to add weight in the rear and midship area, with the main body filling the rear storage compartment, while the lower profile extension runs forward below the seats.
The WakeBallast Sac was designed by the fine people at Inland Surfer for their team Centurion Enzo Wakesurf boat. Over the years this bag has changed slightly in size and port configuration. We have found that the Enzo is versatile but more importantly it is enormous in size. It is perfect for most v-drive boats with lengths of 21' to 25'.
The body of the Enzo Surf sac is designed to fill the rear locker and the leg continues under the rear seat bulkhead which stretches forward under the side passenger bench. When filled to capacity the Enzo surf sac can add between 1000lbs and 1400lbs of water ballast on the surf side creating a monster wave with amazing push throughout the total length of the pocket.
- Enzo Sac Dimensions: Body (Rear Compartment Portion) - 30"L x 25"W x 26"H Arm (Under Seat Portion) - 72"L x 25"W x 12"H
- Port Placement Configuration 2x Drain Ports - Rear end near the bottom of the body portion, 3x Fill/Vent Ports - On the top of the body portion, 1x Fill Port - Toward the end of the leg on the top side.
- Have the greatest surf wake with a flip of the factory ballast switch. The Pro X Enzo Sac is twice the weight of the stand alone rear locker bag and can be integrated to fill with the factory ballast pumps using the Quick Connect Fittings.
Question:
How many ports are in W712 Sac? Answer: There are six ports in the WakeBallast Sac. Remember, No Fittings Included
-
Share -
Tweet -
Pin it